Integrate Paymentsense card machine to connect with Salon Control

The integration option will need to be enabled by Salon Control & Paymentsense.
After integration has been enabled, Salon Control will send the transaction total to your card machine (PDQ terminal) when you select a card payment option at the checkout.

Paymentsense Ingenico Support Tel: 0800 044 5935

>> – Update the card terminal
Press MENU X2 > choose F3 SUPERVISOR & enter the supervisor password (default is 123456 or 01483) > press MENU > choose F4 CALL TMS > the card machine will print a report
Guide: https://docs.connect.paymentsense.cloud/pdq/ingenico/tms-call

>> Turn on integration mode
Press F4 > enter the supervisor password (default is 123456 or 01483) > choose STANDALONE MODE OFF > then press CANCEL > the card machine will reset
Guide: https://docs.connect.paymentsense.cloud/pdq/ingenico/standalone-mode

Dojo Support Tel: 0800 044 3550

>> Turning on integration
Click the menu icon (four lines in the left hand of the screen)
Select ‘Settings’ from the menu
Choose ‘Integrated Paymentsif this option is not available please contact Dojo Support
Select whichever type of integration you’re using, whether that’s Pay at table, or Pay at Counter, or both
Slide the toggle to the right to turn on integration
Guide: https://support.dojo.tech/hc/en-gb/articles/360020974519-How-to-change-your-integration-settings


…..Need to restart the Ingenico card terminal?
Try a soft reboot/restart.
Hold down the clear button and the punctuation button (below the 9 key) at the same time for 3-5 seconds, until the terminal turns off.
Once off, hold the enter button until the terminal powers on.
Try the transaction again.

…..Need to restart the Dojo card terminal?
Try restarting your machine
Hold down the power button, then select ‘Reboot‘.
Try the transaction again.

Was this article helpful?

Related Articles